Precautions for use of laser measuring instrument

Laser caliper is a measuring instrument developed based on the principle of laser scanning. Please pay attention to the following items before use:

1. Operating ambient temperature: 0 - 40 ℃

2. Operating humidity: RH ≤ 80%

3. Power supply: AC 220V ± 10% 50Hz

4. Do not face the laser beam squarely so as to avoid injury to human eyes.

5. The signal line and power line of this special equipment and instrument cannot be mixed with the cables of other equipment.

6. Ensure that the window glass is free of dust and dirt, and use non-woven cloth dipped in anhydrous alcohol to clean the dirt.

7. The laser caliper is an electronic measuring instrument. Please pay attention to waterproof and shockproof during use.

Laser caliper is a high-tech product of photoelectric integration. The laser scanning method is adopted to realize high-speed, high-precision and non-contact measurement for the circular measured object on the production line. Since the non-contact measurement point has no interference to the measured object, it is very suitable for the hot, soft, moving and vibrating measured object.

Within the measuring range, the instrument can preset the nominal value and limit deviation of the outer diameter dimension. The measurement signal is processed in real time by the microcomputer. The measurement result is displayed digitally and the out of tolerance light alarm is given. The preset nominal value is marked, the analog signal of the deviation is output, the relevant parameters of the production equipment are adjusted, the closed loop of the production line is realized, the product quality is improved, and the raw materials are saved.

The instrument has a strong self-test function. In case of failure, it can diagnose itself and display the cause of failure. The operator can also send the diagnosis command through the keyboard for diagnosis. The instrument can operate continuously, stably and reliably.

The instrument can be widely used in the production lines of wire, cable, steel wire, rubber tube, rubber rod, medical glass tube, etc. to realize the automatic control of outer diameter. In the machinery manufacturing industry, for a large number of parts that need to be fully inspected, the instrument can be used to inspect the production line, measure and sort the parts.